home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Languguage OS 2
/
Languguage OS II Version 10-94 (Knowledge Media)(1994).ISO
/
language
/
embedded
/
mcu332
/
332-101.arc
/
C.HLP
< prev
next >
Wrap
Text File
|
1990-01-06
|
1KB
|
38 lines
I/O Register Display Command
The I/O Resister Display Command allows you to view / change
M68332 I/O registers, using a symbolic name rather than the Hex-decimal
memory address.
Upon activation, you are presented with a SubSystem Menu. From
this menu, you may select the subsystem of interest or exit back to the
main menu. Subsystem selections include:
TPU: This shows the Time Processing Unit I/O registers.
QSM: This shows the Queued Serial System I/O registers.
Chipsel:This shows all of the ChipSelect registers.
SysCfg: This show the System Configuration registers.
TPU Parameter RAM:
This shows the parameter RAM for TPU channels 0->15.
SPI RAM Buffers:
This shows the RAM Buffer contents of the following registers.
XMIT: The SPI Transmit buffer.
RECEIVE:The SPI Receive buffer.
COMMAND:The SPI Command / Control Buffer.
Each of these selections display the current contents of the sybsystem
registers in Hex-decimal. At this point, you may enter the symbolic name for
the register that you wish to change or default the prompt by pressing <ENTER>.
If you enter a valid symbolic name, you may then enter new Hex-decimal contents
for the register. If you default the prompt, you are returned to the SybSystem
Menu display.
%END
C.HLP